JH-WD2X Series

JH-WD2X Front-Hinge Aluminium Foot Switch

Model JH-WD2X

Front-hinge JH-WD2 family option with aluminium housing, anti-slip pads and selectable contacts.

Series / ModelJH-WD2X
HousingAluminium alloy
Family Reference Rating8A at 250VAC, resistive
Family Reference Contacts1C
ProtectionIP54; waterproof option IP67

JH-WD2X Front-Hinge Aluminium Foot Switch

Description

The JH-WD2X is the front-hinge version of the compact aluminium-alloy JH-WD2 foot-switch family. The catalogue identifies the X structure as front hinge and shares the family characteristics and selection guide.

Aluminium-alloy housing, yellow pedal and grey base.
Anti-slip rubber base pads and cable gland.
Family options include basic, self-locking, multi-stage, waterproof and connector configurations; availability depends on the complete ordered model.

The catalogue does not provide a separate JH-WD2X electrical-rating table or a separate dimensional drawing. The family reference data below must be confirmed for the selected X model.

Specifications

Family reference data: these characteristics are published for the JH-WD2 family. The explicit catalogue model table lists JH-WD212, JH-WD212F and JH-WD232; it does not separately rate an X-coded model.

Series / Model	JH-WD2X
Housing	Aluminium alloy
Family Reference Rating	8A at 250VAC, resistive
Family Reference Contacts	1C
Protection	IP54; waterproof option IP67
Hinge Position	Front hinge (X option)
Operating Force	≤10.5N
Contact Resistance	<50mΩ initially
Insulation Resistance	≥100MΩ at 500VDC
Dielectric Test	2000VAC for 1 minute
Mechanical Life	>1,000,000 operations
Electrical Life	>100,000 operations
Ambient Temperature	-25°C to +70°C, no condensation or icing
Ambient Humidity	45% to 85%RH
Standard Colours	Yellow pedal; grey base

X-structure selection

Structure	No X: rear hinge; X: front hinge
Function	1: standard; 2: multi-stage; 3: self-locking alternating; 4: waterproof IP67; 5: USB
Cable	2: 0.5mm² × 2m; 3: 0.5mm² × 3m; 5: 0.5mm² × 5m; C: connector type
Contacts	No suffix: 1C; 1: non-switching output; 2: 2C; 3: 1A; 4: 2A

Options are for selection reference and cannot be freely combined. Confirm the complete model, contact arrangement, cable supply, cable length and connector before ordering.

JH-WD2 family model selection identifying X as front hinge. Click to view the full-size image.

Dimensions

Shared family reference: this is the JH-WD2 drawing supplied in the catalogue, with 135 × 71mm body footprint, 42mm height, 3 × Ø5mm mounting holes and 123 ±0.2mm / 52 ±0.2mm mounting callouts. A separate JH-WD2X drawing is not provided; confirm the front-hinge variant and its mounting dimensions before installation.

Wiring & Installation

The diagram below is the JH-WD2 family reference for a 1C changeover contact. Other contact forms are selection options and require the wiring information for the ordered JH-WD2X model.