Skip to main content
+86-577-5718 7518
Language
Get a QuoteQuote

EJ19-PM Ultra-Short Metal Push Button Switch

Mid-to-high-end pushbutton switches, indicator lights, relays, buzzers and accessory solutions

EJ19-PM 19mm Ultra-Short Push Button. IP65; IP67 on request. CCC/CE/UL. Wenzhou Jinhong.

Contact Us
EJ19-PM Ultra-Short Metal Push Button Switch

Products

4 models.

EJ19-PM Non-Illuminated Flat Head Metal Push Button Switch (Momentary) EJ19-PM Non-Illuminated Flat Head Metal Push Button Switch (Momentary)
  • Model:EJ19-211PM
  • Panel cut-out:19 mm
 EJ19-PM Non-Illuminated Raised Head Metal Push Button Switch (Momentary) EJ19-PM Non-Illuminated Raised Head Metal Push Button Switch (Momentary)
  • Model:EJ19-221PM
  • Panel cut-out:19 mm
 EJ19-PM Illuminated Power Symbol Flat Head Metal Push Button Switch (Momentary) EJ19-PM Illuminated Power Symbol Flat Head Metal Push Button Switch (Momentary)
  • Model:EJ19-271PM
  • Panel cut-out:19 mm
 EJ19-PM Illuminated Ring Raised Head Metal Push Button Switch (Momentary) EJ19-PM Illuminated Ring Raised Head Metal Push Button Switch (Momentary)
  • Model:EJ19-261PM
  • Panel cut-out:19 mm

EJ19-PM — 19 mm Ultra-Short Anti-Vandal Metal Push Button Switch

EJ19-PM gives the popular 19 mm panel size an ultra-short, PCB-mounted body. It is meant for signal circuits on thin panels such as intercoms, vending fronts and control pads, where a standard switch body would be too deep. The SUS304/316 front is sealed to IP65 (IP67 on request) and needs ≤5 N to operate.

EJ19-PM versions
ModelHeadLEDAction
EJ19-211PMFlatNoneMomentary
EJ19-221PMRaisedNoneMomentary
EJ19-271PMFlatPower symbol LEDMomentary
EJ19-261PMRaisedLED ringMomentary

Because it is rated 2 A at 48 V, EJ19-PM is intended to feed a controller, PLC input or circuit board rather than switch a load directly.

Key data

  • Thermal current 2 A, rated voltage 48 V; 1NO contact
  • Minimum load 3 V AC/DC, 1 mA; initial contact resistance ≤50 mΩ
  • Mechanical and electrical life 100,000 operations
  • Operating travel ≤0.5 mm; operating force ≤5 N

EJ19-PM or EJ19-PP?

Both share the same ratings. EJ19-PM solders onto a PCB; EJ19-PP comes with a quick-connect connector lead for wiring without soldering. For mains-voltage or high-current circuits see J19, J19-X or J19-C. Back to 19 mm metal push buttons.

Ordering EJ19-PM

Quote the full model code and add the symbol, LED colour and lamp voltage you need; custom laser-etched marks are possible on request. Factory direct from Wenzhou Jinhong, OEM/ODM welcome. Request a quotation or samples for EJ19-PM.